In the daily maintenance of diesel generator sets, frequent failures are often caused by the neglect of minor problems. Therefore, the quark motor summarizes the following small details that are easily overlooked for common problems in daily maintenance:
1. Lack of checking and adjusting the delivery valve.
Because the oil delivery valve is in a closed structure, it is difficult to find problems in routine inspections. Even if it is severely worn, it is often neglected; it will eventually lead to problems and safety accidents such as diesel exhaust smoke, cylinder knocking, and slow operation.
Therefore, after purchasing a diesel generator set, the maintenance schedule and the maintenance content of each component must be prepared according to the corresponding use requirements, so that the loss and replacement of the components can be effectively found in time.
2. The valve parts are aging, causing the valve to be out of timing.
Due to negligence in overhaul of the aging machine, the cam wear geometry changes, causing problems such as late opening and early closing of the valve. Therefore, when adjusting the valve of the aging machine, the valve clearance value should be appropriately reduced according to the actual situation to compensate for the valve phase. error.
3. Ignore the oil quality or mix and match different brands of oil.
The engine oil will produce oxides and metal deposits during use, which will affect the quality of the newly added engine oil; and the mixing of different brands of engine oil is very likely to cause other deposits and leave safety hazards. Therefore, try to select the engine oil specified by the power manufacturer, and use the oil tank cleaning plan according to the actual use.
Friendly reminder from Fujian Quark Motor: After purchasing a diesel generator set, be sure to prepare the corresponding maintenance time and schedule with the after-sales personnel, so that the safety of electricity can be truly achieved.